RealView MDK-ARM 3.05

即KEIL FOR ARM 3.05 ( 2007.3)

也可以到本站的FTP中下载.

ftp://www.mcu123.com

用户名和密码:mcu123

好用的ARM开发环境
Keil uVision调试器可以帮助用户准确地调试ARM器件的片内外围功能(I2C、CAN、UART、SPI、中断、I/O口、A/D转换器、D/A转换器和PWM模块等功能)。ULINK USB-JTAG转换器将PC机的USB端口与用户的目标硬件相连(通过JTAG或OCD)，使用户可在目标硬件上调试代码。通过使用Keil uVision IDE/调试器和ULINK USB-JTAG转换器，用户可以很方便地编辑、下载和在实际的目标硬件上测试嵌入的程序。

    支持Philips、Samsung、 Atmel、 Analog Devices、 Sharp、 ST等众多厂商ARM7内核的ARM微控制器。

高效工程管理的uVision3集成开发环境
* Project/Target/Group/File的重叠管理模式，并可逐级设置；
* 高度智能彩色语法显示；
* 支持编辑状态的断点设置,并在仿真状态下有效。
高速ARM指令/外设模拟器
* 高效模拟算法缩短大型软件的模拟时间；
* 软件模拟进程中允许建立外部输入信号；
* 独特的工具窗口，可快速查看寄存器和方便配置外设；
* 支持C调试描述语言，可建立与实际硬件高度吻合的仿真平台；
* 支持简单/条件/逻辑表达式/存储区读写/地址范围等断点。
多种流行编译工具选择
* Keil高效率C编译器；
* ARM公司的ADS/RealView 编译器；
* GNU GCC 编译器；
* 后续厂商的编译器。

请尊重知识版权！本软件仅供测试之用，请勿用于商业用途.

更新:

• [µVision3 IDE/Debugger/Simulator]
  Corrected a problem that could cause the IDE to crash when the mouse was right-clicked in the project window when no item was selected.
• [µVision3 IDE/Debugger/Simulator]
  Corrected a problem which caused *** Device is not supported by Toolchain! *** to be incorrectly issued during the build process.
• [µVision3 IDE/Debugger/Simulator]
  Enhanced the AT91SAM7 flash algorithms to work for Atmel AT91SAM7XC devices.
• [µVision3 IDE/Debugger/Simulator]
  Corrected a problem with Cortex-M3 debugging that caused target debugging to fail due to incorrect memory reads when the debugger started.
• [µVision3 IDE/Debugger/Simulator]
  Corrected problems with the USB PLL Setup in the startup file for STMicroelectronics STR75x devices.
• [µVision3 IDE/Debugger/Simulator]
  Added an RTX example and configuration file for STR75x devices.
• [µVision3 IDE/Debugger/Simulator]
  Added support for the Atmel AT91SAM9260 with bootloader, example, flash algorithm, startup code, and include files.
• [µVision3 IDE/Debugger/Simulator]
  Added support for the Atmel AT91SAM9261 with bootloader, example, flash algorithm, startup code, and include files.
• [µVision3 IDE/Debugger/Simulator]
  Corrected the size information in the MAC71xx data flash algorithm.
• [µVision3 IDE/Debugger/Simulator]
  Corrected a problem with the STMicroelectronics STR71x XTI interrupt simulation that failed to re-trigger when multiple sources are active at the same time.
• [µVision3 IDE/Debugger/Simulator]
  Corrected a simulation problem with the STMicroelectronics STR91x PORTx register.
• [µVision3 IDE/Debugger/Simulator]
  Corrected a simulation problem in which the RTC was not clocked in power-down modes of NXP LPC2000 devices.
• [µVision3 IDE/Debugger/Simulator]
  Corrected a simulation problem in which the NXP LPC2000 overrun bit was incorrectly set for UART input values above 0x80.
• [µVision3 IDE/Debugger/Simulator]
  Added Real-Time Agent support for STMicroelectronics STR91x and Atmel AT91SAM7x devices.
• [µVision3 IDE/Debugger/Simulator]
  Added USB examples for STMicroelectronics STR91x and STR75x and NXP LPC23xx devices.