请尊重知识版权！本软件仅供测试之用，请勿用于商业用途.对软件感兴趣直接从WWW.KEIL.COM公司购买。

好用的ARM开发环境
Keil uVision调试器可以帮助用户准确地调试ARM器件的片内外围功能(I2C、CAN、UART、SPI、中断、I/O口、A/D转换器、D/A转换器和PWM模块等功能)。ULINK USB-JTAG转换器将PC机的USB端口与用户的目标硬件相连(通过JTAG或OCD)，使用户可在目标硬件上调试代码。通过使用Keil uVision IDE/调试器和ULINK USB-JTAG转换器，用户可以很方便地编辑、下载和在实际的目标硬件上测试嵌入的程序。

支持Philips、Samsung、 Atmel、 Analog Devices、 Sharp、 ST等众多厂商ARM7内核的ARM微控制器。

高效工程管理的uVision3集成开发环境
* Project/Target/Group/File的重叠管理模式，并可逐级设置；
* 高度智能彩色语法显示；
* 支持编辑状态的断点设置,并在仿真状态下有效。
高速ARM指令/外设模拟器
* 高效模拟算法缩短大型软件的模拟时间；
* 软件模拟进程中允许建立外部输入信号；
* 独特的工具窗口，可快速查看寄存器和方便配置外设；
* 支持C调试描述语言，可建立与实际硬件高度吻合的仿真平台；
* 支持简单/条件/逻辑表达式/存储区读写/地址范围等断点。
多种流行编译工具选择
* Keil高效率C编译器；
* ARM公司的ADS/RealView 编译器；
* GNU GCC 编译器；
* 后续厂商的编译器。

请尊重知识版权！本软件仅供测试之用，请勿用于商业用途.对软件感兴趣直接从WWW.KEIL.COM公司购买。

What's New in MDKARM Version 3.15b

[Device Support]
Added support for ARM Cortex-M1 with the Altera Cyclone-III Starter Board in folder ..\ARM\Boards\Altera\CortexM1.
[Device Support]
Added numerous example projects for STM32 in folder ..\ARM\Boards\Keil\MCBSTM32.
[Device Support]
Enhanced example project for LPC24xx devices in folder ..\ARM\Boards\Keil\MCB2400 including SDRAM and NOR Flash support.
[Device Support]
Added new Luminary devices.
[Device Support]
Added new Atmel AT91SAM9261 example demonstrating DATA FLASH programming.
[Device Support]
Added RTX example for Cortex-M1 in folder ..\ARM\Boards\ARM\Cortex-M1\RTX_Blinky. .
[Device Support]
Added RTX traffic example for Keil MCB2300 board in folder ..\ARM\Boards\Keil\MCB2300\RTX_Traffic.
[Device Support]
Added support for Samsung S3F4Axx devices in folder ..\ARM\Boards\Samsung\S3F4A0K.
[Device Support]
Added EMC support to NXP LPC2300 startup code.
[µVision3 IDE/Debugger/Simulator]
Corrected a problem with LPC23xx and LPC24xx simulation of the battery backup memory, external interrupt inputs, and PLL CCO low limit (now 48MHz).
[µVision3 IDE/Debugger/Simulator]
Simulation support for STM32 devices is now complete (except for I2C and SPI).
[µVision3 IDE/Debugger/Simulator]
Corrected a problem with symbolic debugging of local symbols.
[µVision3 IDE/Debugger/Simulator]
Corrected a problem with C++ files where the option Misc was not stored when it was applied to a single file or file group.
[µVision3 IDE/Debugger/Simulator]
Complete stack tracing implemented.
[µVision3 IDE/Debugger/Simulator]
A struct cast can now be used in expressions. struct tags can be qualified with a module name, for example (\module\tag) (0x1000).
[ULINK2]
Serial Wire Viewer (SWV) support for Cortex-M3 devices has been added. Example projects are provided in folder ..\ARM\Boards\Keil\MCBSTM32\STLIB_Blinky and ..\ARM\Boards\Keil\MCBLM3S\Blinky.
[PC-LINT]
Added a PC-LINT configuration file for the RealView Compiler (..\ARM\BIN\CO-RV.LNT).
[Utilities]
Corrected a problem where the HID_Client example created potential memory leaks. Changed folder to ..\ARM\Utilities\HID_Client and converted to Microsoft Visual Studio 2005 project.