What's New in MDKARM Version 3.22a

• [New Device Support]
  
  • Atmel AT91SAM9Rxx
  • Cirrus Logic CS7401xx-IQZ
  • Luminary Micro LM3S576x, LM3S5752, LM3S5747, LM3S573x, LM3S5662, LM3S5652, LM3S5632, LM3S3759, LM3S3749, and LM3S3739
  • NXP LPC32XX and LPC2460
  • STMicroelectronics STR912FAZ4X, STR912FAW4X, STR911FAW4X, STR911FAM4X, STR910FAW32, and STR910FAZ32
• [Device Support]
  Updated Signum drivers that now provide ETM setup for MCB2300 and MCBSTR9 evaluation boards.
• [Device Support]
  Corrected the headerfile for NXP LPC23xx/24xx devices.
• [Board Support]
  Added support for CQ_STARM32 board in folder ..\ARM\Boards\ST\CQ-STARM2.
• [RTX Debugging]
  Added support for RTX Event Viewer on Cortex-M3 based devices.
• [ULINK Support]
  Added MCBSTM32: STM32 FLASH OPTION BYTES PROGRAMMING describes the flash algorithm setup Option Bytes programming on STM32 devices. Refer also to the example in folder ..\ARM\Boards\Keil\MCBSTM32\Blinky.
• [ULINK Support]
  Corrected Fast GPIO display problem on NXP LPC2000 devices which was cased by a hardware side effect.
• [ULINK Support]
  Corrected a potential hang-up of ULINK2 when using the Serial Wire Viewer on Cortex-M3 devices.
• [ULINK Support]
  Added Flash algorithms which support off-chip Flash ROM devices on Cortex-M3 devices. The Cortex-M3 specific algorithm files use the file name extension *.FLM.
• [GNU Support]
  Enhanced support for GNU is now available for Cortex-M1/M3, ARM7 and ARM9 devices. Details are Application Note 199: Using µVision with CodeSourcery GNU ARM Toolchain. This application note also provides to example projects.